Sea Dragon Fluoro-Dual Beam
Two switchable beams transform the versatile light from a blue fluoro 65° flood light to a white 800 lumen 15° concentrated beam with a push of a button.
Vibrant and rich fluoro-colors
The Sea Dragon Fluoro-Dual Beam’s Royal blue LED’s emit blue light in the range of 450-460nm that is in the approximate wavelength to “excite” the fish, plants or organisms into making a light filled energy response; SeaLife adds a finely tuned and proprietary dichroic filter that pinpoints the exact light wavelength so to get the highest energy response from the underwater subject results.
Switchable dual beams features six CREE XT-E Royal Blue LED’s (450-460nm) flood beam and one CREE XP-L LED white spot beam
65° fluorescent wide angle beam and 15° white spot beam angles evenly illuminates the subject with no hot spots
One button control for easy operation - one button to power light on/off and select brightness
Four brightness levels: 100% fluoro flood, 50% fluoro flood,100% white spot, and 50% white spot
Hidden emergency signal mode: 1 second blink interval and SOS Morse code
120 minute burn time at full power and constant brightness
Depth rated to 330 feet/100 meters
Easy to expand with Flex-Connect™ trays, grips and Flex Arms, handle, Y-S, ball joint, cold shoe and other accessories
Quick-release button to detach light and aim in crevices and hard to reach areas
Includes integrated dichroic filter and two universal barrier filters for your dive mask and camera for optimal fluoro viewing and photography
Corrosion-proof metal light head for heat dispersion and durability
Removable 25W Li-Ion battery w/ charger and international plug adapters included
Waterproof battery compartment - even if the O-ring seal fails, the battery compartment is isolated so water cannot reach the internal electronics
Universal mounting screw fits SeaLife and other brands of underwater cameras w/ standard ¼-20 tripod mount
SeaLife Sea Dragon Fluoro vs. Harmful UV lights
For BEST results and SAFETY reasons, the Sea Dragon Fluoro-Dual Beam uses Cree Royal Blue LED's combined with a proprietary dichroic filter. SeaLife NEVER has and never will use Ultraviolet (UV) LED's.
Some companies are selling underwater UV lights claiming the results are better than blue LED's, and that there is no need for yellow barrier filter over your mask and/or camera. The truth is that UV lights pose a serious safety hazard to the eyes of humans and sea creatures. UV light is invisible, so you don't realize that your eye is being bombarded with UV rays. It is a proven fact that extended exposure to UV light has been linked to eye damage, including cataracts, macular degeneration, pingueculae, pterygia and photokeratitis that can cause temporary vision loss.
The Sea Dragon Fluoro-Dual beam's Blue LED's, combined with our exclusive dichroic filter, emits a powerful blue light creating the optimal wavelength to excite underwater organisms. To see the fluorescence effect best, two yellow barrier filters are included - one for your mask and another for your camera. The primary purpose of the yellow filters are to absorb the visible excess blue light, so you only see is the fluorescence effect.
Underwater testing shows that more sea creatures fluoresce when exposed to the Sea Dragon Fluoro-Dual Beam when compared to UV lights. For a detailed scientific explanation regarding Blue LED's vs. UV, please visit www.firedivegear.com.
Sea Dragon Fluoro-Dual Beam Photo/Video/Dive Light Specifications
|Body Material||Anodized aluminum light head with fiber-reinforced polycarbonate body|
|Light Source/Bulb Type||Six 5W CREE XT-E Royal Blue LED’s and one CREE XP-L white LED|
|Brightness||26 watt/m² fluoro flood and 800 lumen white spot (constant brightness)|
|Effective Range||4 ft/1.2 m (depends on camera model and visibility)|
|Brightness Levels||100% fluoro flood, 50% fluoro flood, 100% white spot and 50% white spot|
|Button Control||Long push (1 sec) to power light on/off; Short push cycles through 100% → 50% → 25% → 100% [repeat cycle]|
|Light Modes||Constant light or emergency signal light (activated by long push of power button); one second flash or SOS at full power|
|Color Temperature||5000 ~ 7000K for white spot. Color temp does not apply to blue LED’s|
|Color Rendering Index*||90|
|Beam Angle||65° fluoro flood and 15° white spot|
|Battery||Lithium Ion 7.4V, 3400 mAh, 25Wh (included)|
|Battery Charge Time||170 minutes|
|Run Time||120 minutes at full power/240 minutes at half power/480 minutes at quarter power|
|Depth||Tested to 330 feet/100 meters|
5.1" x 2.2" x 3.8" (13cm x 5.6xm x 9.7cm) Head only
|Weight||15.9oz (450g) head only without battery ; 12.9oz (365g) head with battery|
|Bulb Life||35,000 hours|
|O-ring||Dual NBR o-rings (lube included)|
The Fluoro-Dual beam light is a collaboration with Fire Dive Gear, a leading authority in underwater fluorescence diving. For more information about fluoro diving, specialty courses and custom-made filters, please visit www.firedivegear.com.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.
Sea Dragon Fluoro Dual Beam UW Photo-Video Light head
Flex-Connect Grip, Single Tray and Ball-Joint adapter
Universal barrier filters for mask and camera
Neoprene sleeve to protect filters and secure filter to mask strap
Lithium Ion battery (7.4V, 3400 mAh)
AC Power Adapter
Int’l plug adapters
O-ring removal tool